![]() ![]() ![]() In any case pwere ALL interconnected amps, etc from the same power source/receptacle for system safety. Amplificador Peavey xr 600e: 30 Dos altavoces Peavey Eurosys 3 de 150w. If you plug into the effects loop out jack,OFTEN the connection to the internal power amp is broken so you might have to arrange a special cable as a wye to go back into the power amp as well as your external amp. Modelo compatible para peavey 14 xt pv12m pv 12m y tambiƩn. Try each speaker individually at a REASONABLE level to test. ![]() In either case, with only 1/4 of the 150 Watts to each, the speakers should NOT have been damaged. Now if you mean they were "daisy chained" like the amp went to one speaker and another cable connected that speaker to another, then you REALLY had ALL speakers in parallel electrically which would be at the 2 ohm low limit of the amp. I question if you really mean the speakers were in series? This requires a special cable to do this. If the Peavey's are 8 ohms, then your total load was 8 ohms for the series/parallel arrangement which is well within the 2 ohm drive capability of the Crate according to specs. 150 watts should be easily handled by four Peavey speakers in the connection you described. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |